Specifications Common To All Cp-215 Repeaters - YASKAWA MP920 User Manual

5 215IF Module

5.7.3 Specifications Common to All CP-215 Repeaters

5.7.3
System Configuration Using Star Connections
The following example shows a system configuration using star connections.
1st
2nd
CP-215 electrical bus
Repeater
1st
2nd Repeater
ST#5
Fig. 5.12 System Configuration Using Star Connections
Specifications Common to All CP-215 Repeaters
Power Supply
Item
Rated Input 24-VDC Models
Voltage
100-VAC, 200-VAC,
100-VDC Models
Power 24-VDC Models
Consumption
100-VAC, 200-VAC,
100-VDC Models
Input Inrush 24-VDC Models
Current
100-VAC, 200-VAC,
100-VDC Models
Overcurrent 24-VDC Models
Protection
100-VAC, 200-VAC,
100-VDC Models
Holding Time
ST#1
Up to foru Repeaters can be connected
between two stations.
In the start connection method,
Repeaters for branch lines are radially
Repeater
connected from the electrical bus.
Repeater
Repeater Repeater
Repeater Repeater
ST#4 ST#3
24 VDC ±20% (19.2 to 28.8 VDC)
100/115 VAC ±15% (85 to 132 VAC, 47 to 63 Hz)
100 VDC -10%, +40% (90 to 140 VDC)
200 VAC ±15% (170 to 230 VAC, 47 to 63 Hz)
5 W
10 W
5 A peak at 24 VDC
15 A peak at 100 VDC
15 A peak at 100 VAC
30 A peak at 200 VAC
With built-in 1-A fuse
With built-in 2-A fuse
10 ms or less
5-44
Repeater
Repeater
ST#2
Specifications