YASKAWA MP920 User Manual page 84

Link Assignments
Assignment Data Settings
Assign the I/O registers to be linked between the stations connected to the CP-215 network.
Set the station number, controller type, and I/O register number of each station to be linked.
2.
3.
4.
5.
6.
7.
1. Configuration Information
Displays the 215IF configuration information that was set in the Module Definition
Window.
2. SYNC-SCAN
The 215IF performs regular transmissions. This setting determines whether the trans-
mission data refresh cycle of the 215IF transmission is synchronized with the HIGH or
LOW scan cycle of the Machine Controller.
• HIGH: High-speed scan
• LOW: Low-speed scan
3. ST#
Displays the station number. Two asterisks (**) will be displayed for the local station
number. The local station number is determined by the number input in the Transmis-
sion Parameter Tab's Own Station Number Box. The station number displays only the
number input in the Transmission Parameter Tab's Max No. of Stations Connected Box.
4. TYPE
Select a name for the I/O device connected to each station. The following table shows
the I/O devices that can be selected.
Selected Item
CP-3500H CP-3500H
CP-316 CP-316
CP-916A CP-916A
CP-9200SH CP-9200SH
CP-317 CP-317
I/O Device Name
5-23
5.5 CP-215 Transmission Definitions
5