Section 6. Codes and Tests
Operator Display Messages
Messages
The operator display has two sections, the
steering indicator and the battery indicator. See
Figure 6- 1.
Steering
Indicator
6- 1 .
Figure
Operator Display
Steering lndicator Messages
The steering indicator has five LEDs and shows
the current steering direction based on the
position of the drive unit. See Figure 6- 1.
When the truck is in maintenance mode, the
steering indication is overridden, and the LEDs
flash as the horn "clicks". See "Maintenance
Mode" on page 6-4.
Toyota Orderpicker Model 7BPUE 15 Service Manual
Battery
Indicator
Table
Each steering
6- 1.
indicator message is explained in
All LEDs scroll in
side-to-side pattern
Left LED on steady
Mid-Left LED on steady
Center LED on steady
Mid-Right LED on
steady
Right LED on steady
All LEDs blink in
unison a s the horn
beeps
Battery Indicator Messages
The battery indicator has five LEDs used in
highest priority).
Fault Code
3
(highest)
Info
Display
Battery
1
State-of-
(lowest)
Charge
I
Table
Battery lndicator Messages
00700-CL222-05, 1 5 March 2005
Drive unit position is
unknown
Drive unit in left,
end-of-travel zone (more
than 65"
counter -clockwise)
Drive unit in left zone
counter-clockwise)
Drive unit in center zone
(within 10" of center)
Drive unit in right zone
(1
Drive unit in right
end-of-travel zone (more
than 65" clockwise)
In maintenance mode
Series of blinks for each
digit (all 5 blink
together); see "Operator
Display Fault Codes" on
page 6- 15
a
Blinks
single LED to
indicate a particular
condition; seeTable 6-3,
"Info Display Messages,"
on page 6-3.
Single, steady LEDs
represent the current
state-of-charge.