Auxiliary Power Fuses; Fuse Locations; Fuse Plate Mounting And Cable Routing - Toyota 7BPUE15 Service Manual

Section 7. Component Procedures
Fuses
Fuses
Replacement
When replacing fuses, make sure fuses are
installed in the proper order. See Figure 7-76.
7-76.
Figure

Fuse Locations

N : Refer also to "Fuses" on page 5- 15.
O TE
7-77.
Control Fuses on Steer/Tractor Manager
Figure
Toyota Orderpicker Model 7BPUE 15 Service Manual

Auxiliary Power Fuses

7-78.

Fuse Plate Mounting and Cable Routing

Figure
Installation
Turn key switch OFF and disconnect
1.
battery.
2. Remove operator console cover.
Remove the front plate under the console
3.
from the operator platform.
Line u p the fuse block on decal and mark
4.
top and bottom holes.
5. Punch out the holes.
6. Push the fuse block mounting screws
through the holes in the decal.
7. Line up the screws with the mounting
holes on the plate and adhere the decal to
the plate.
8. Mount the fuse holder on the caution
decal. Secure with two pan head screws.
See Figure 7-79.
00700-CL222-05, 1 5 March 2005
Electrical Components