Toyota 7BPUE15 Service Manual page 369

Section 9. Theory of Operation
Pinout Matrix
TO
T2
T3
AGRD
12 V
SHIELD
RIGHT
Toyota Orderpicker Model 7BPUE 15 Service Manual
her side you should see around
1.5 in. to the right you should see around
around 75mVAC.
Communication lines used by the steer
controller card to tell the antenna card
which frequency it should be looking for.
Communication lines used by the steer
controller card to tell the antenna card
which frequency it should be looking for.
Communication lines used by the steer
controller card to tell the antenna card
which frequency it should be looking for.
Communication lines used by the steer
controller card to tell the antenna card
which frequency it should be looking for.
B-
to the antenna card.
Positive supply from the steer controller
card power supply for the antenna card.
Shield that helps reduces noise
interference in the AC voltage from the
antenna card. It must be connected to
on the at the filter card connection only.
This is the input from the left tractor sensor
coil to the filter card. Centered over the
wire you should see around 32mVAC.
1.5 in. to the right you should see around
around 75mVAC.
No useful Steer
voltages are Controller
measurable Card
N o useful Steer
Controller
voltages are
measurable Card
N o useful Steer
voltages are Controller
measurable Card
N o useful Steer
voltages are Controller
measurable Card
TP4
Steer
Controller
Card
Steer
with key switch Controller
closed Card
TP4
Steer
Controller
(B-)
Card
Antenna
Card
00700-CL222-05, 1 5 March 2005
Antenna
Card
Antenna
Card
Antenna
Card
Antenna
Card
Antenna
Card
Antenna
Card
Antenna
Card
Filter Card