Toyota Orderpicker Model 7BPUE 15 Service Manual
Covers and Finish
Guard
Mast
7- 13.
Figure
M a s t G u a r d
Removal
1. Lower platform fully to floor. Turn key
switch OFF and disconnect battery.
2. Loosen four screws in each mounting
bracket to gain clearance for mast guard.
Lift u p mast guard until notches in mast
3.
guard clear the mounting brackets.
Pull screen guard forward to remove.
4.
Installation
Insert screen guard over the
1.
brackets.
2. Lower guard until brackets align just
above the opening. See Figure 7- 13.
Tighten all
mm socket head screws
3.
6
using a n Allen wrench.
00700-CL222-05, 1 5 March 2005
mounting
4
Section 7. Component Procedures
Mast Guard