Toyota 7BPUE15 Service Manual page 332

Toyota Orderpicker Model
The position of the drive wheel is indicated
by the five LEDs on the operator display.
These are based on the input from the
steer feedback encoder.
See Table 9- 1 on page 9-29
See Figure 9-7 on page 9-30
N : After self-diagnostics is complete, the
O TE
operator must request steering before
the truck will travel in full speed.
All LEDs scroll in
side-to-side pattern
Left LED on steady
Mid-Left LED on
steady
Center LED on steady
Mid-Right LED on
steady
Right LED on steady
All LEDs blink in
unison a s the horn
clicks
00700-CL222-05, 1 5
Service Manual
Drive unit position is
unknown
Drive unit in left,
end-of-travel zone (more
t h a n 65"
counter-clockwise)
Drive unit in left zone
counter-clockwise)
Drive unit in center zone
(within 10" of center)
Drive unit in right zone
Drive unit in right
end-of-travel zone (more
t h a n 65" clockwise)
In maintenance mode
2005
March
9.
Section Theory of Operation
Steering