Special Program Mode - Toyota 7BPUE15 Service Manual

Toyota Orderpicker Model 7BPUE 15 Service Manual
Table Diagnostics and Special Diagnostics list
Display
NO KNOWN FAULTS
OVERVOLTAGE
THERMAL CUTBACK
THROTTLE FAULT
1

Special Program Mode

The chart below shows you line items in the
Special Program Mode.
Access
1. Turn the key switch OFF and disconnect
the battery connector.
2. Remove the tractor cover.
3. Connect the PMT to the traction power
amplifier.
4. Connect the battery and turn the key
switch ON.
5. Press and hold the more info key; press
the program key.
6. Scroll through the line items using either
scroll display key until the item you want
to change is the top line on the display.
See Table 5-6 on page 5-23.
7. Press either change value key until you
reach the value you want.
00700-CL222-05, 1 5 March 2005
No known faults
Battery voltage too high
Thermal cutback due to over/under temperature
Throttle wiper input fault
Table
SETTINGS+
CONTRAST
ADJUSTMENT
Section 5. Troubleshooting
Programmable Maintenance Tool
Explanation
Special Program Mode
Load programming settings
Adjust display contrast
Display PMT information