Subject: Deadman Pedal Switch Replacement
INSTALLATION PROCEDURE B
Switch Replacement for "Welded" Type Deadman Pedal
1. Raise the carriage of the truck to a height where the deadman pedal can easily be
accessed.
2. Turn the key switch OFF and disconnect the battery connector.
3. Remove the deadman pedal cover
4. Unplug electrical connector(s) at deadman switch(es).
5. Remove deadman pedal assembly
6. Remove old switches.
7. Grind the bracket until the new switch(es) can be installed without rubbing against
the bracket.
8. File all edges smooth where the harness enters the bracket.
Page 3 of 4