Toyota 7BPUE15 Service Manual page 360

Toyota Orderpicker Model
NC
JT 12VP
12VP
HEIGHT
SW (S29)
DGND
J
PT5 -5 12VP
HEIGHT 180 in.
SW
DGND
12VP
DGND
00700-CL222-05, 1 5
Service Manual
usable measurements available.
Connection for computer interface no
usable measurements available.
Not connected to any circuitry on the
STM.
Supplies working voltage to the lift lower
pendant. If not present, check voltage at
STM JPT9-6 and see if IL1 is lit.
Supplies working voltage to the 120/150
in. switch. If not present, check voltage at
STM JPT9-6 and see if IL1 is lit.
Supplies B- to circuitry on the STM when
the switch is closed. When the switch is
open the truck will have limited travel
speed.
B- for S29, supplied through the STM via
B- cable at the TPA.
Supplies working voltage to the1 80 in.
switch. If not present, check voltage at
STM JPT9-6 and see
Supplies B- to circuitry on the STM when
the switch is closed. When the switch is
open the truck will have limited travel
speed.
B- for S25, supplied through the STM via
B- cable at the TPA.
Supplies working voltage to the Lift Limit
Switch (S24). If not present, check voltage
at STM JPT9-6 and see
Supplies B- to circuitry on the STM when
the switch is closed. When the switch is
open the truck will have no lift unless the
bypass switch (S5
B- for S24, supplied through the STM via
B- cable at the TPA.
2005
March
Section
measurable
No useful
voltages are
measurable
N A
with key switch
closed
with key switch
closed
Switch closed
Switch open
5Vdc
with key switch
if
closed
Switch closed
Switch open
5Vdc
with key switch
if
closed
Switch closed
Switch open
)
is closed.
9.
Theory of Operation
Pinout Matrix
STM Lift Lower
Pendant
STM
inch switch
STM
in. switch
STM S29
STM 180 in.
switch
180 in. STM
switch
S25
STM
S24
STM
STM
SW
S24
STM