Toyota Orderpicker Model 7BPUE 15 Service Manual
Covers and Finish
Covers and Finish
Tractor Covers
7- 10.
Figure
Top Cover Removal
Removal
1.
Press in the two latch buttons then lift the
top cover straight up and out. See
Figure
7- 10.
2. Pull out the tractor cover from the top.
Installation
1. Position the bottom of the tractor cover
inside the bumper and push in from the
top.
2. Position the top cover over the two latch
buttons and push down until they snap
into place.
00700-CL222-05, 1 5 March 2005
Section 7. Component Procedures
Tractor Covers