Toyota Orderpicker Model 7BPUE 15 Service Manual
Electrical Components
Remove
1. Turn key switch OFF and disconnect
battery.
2. Remove top and tractor covers.
3 . Remove control panel cover. See
Figure 7-66.
Figure 7-66.
4. Disconnect the following cables and bus
bars:
S2
5. Remove three bolts.
00700-CL222-05, 1 5 March 2 0 0 5
Section 7. Component Procedures
6. Remove traction power amplifier. See
Figure 7-67.
Figure 7-67. Traction Power Amplifier
Install
1. Install traction power amplifier on top of
power panel on top of tractor. See
Figure 7-67.
2. Secure traction power amplifier with three
bolts.
3 . Connect cables and b u s bars. See
Figure 7-67.
4. Install control panel cover. See
Figure 7-66.
5. Install tractor and top covers.
6. Connect battery and turn key switch ON.
7. Test truck operation.
Traction Power Am p lifier