Toyota Orderpicker Model 7BPUE 15 Service Manual
Installation Instructions
N
: These instructions pertain to trucks that
O TE
are shipped horizontally on a cradle.
1. Remove long bolts from bumper plate (two
bottom bolts).
2. Remove banding, forks and truck from
cradle.
3. Use two hoists in conjunction to stand
truck upright.
4. Install
bumper plate bolts.
2
5.
Install dipstick in drive unit.
6. Remove shipping cap and screws in
hydraulic reservoir and install cap and
screen.
7. Install forks. See "Forks" on page 7-94.
8. Install battery. See "Battery Procedures"
on page 7-32.
9. Connect battery, turn key switch ON and
test truck functions.
00700-CL222-05, 1 5 March 2005
Section 3. Systems Overview
Installation lnstructions