Section 7. Component Procedures
Operator Console Cover
Operator ConsoleCover
Make sure the operator platform is fully
lowered before placing any part of your
body between the masts.
7- 1 1 .
Figure
Operator Console, Cover Installed
Removal
7- 12.
Figure
Operator Console, Cover Removed
1. Lower platform to the floor. Turn key
switch off and disconnect battery.
2. Loosen the two captivating knobs located
on each side of the cover.
Toyota Orderpicker Model 7BPUE 15 Service Manual
1. Position cover over console components
and secure to the platform with-the two
captivating knobs.
00700-CL222-05, 1 5 March 2005
Covers and Finish