Toyota 7BPUE15 Service Manual page 28

Toyota Orderpicker Model 7BPUE15 Service Manual
Keep the charging area well-ventilated to avoid
hydrogen gas concentration.
Turn the key switch OFF before disconnecting
the battery from the truck a t the battery
connector. Do not break live circuits a t the
battery terminals. spark often occurs a t the
A
point where a live circuit is broken.
Do not lay tools or metal objects on top of the
battery. A short circuit or explosion could
result.
Keep batteries clean. Corrosion causes shorts
to the frame and possibly sparks.
00700-CL222-05, 1 5 March 2005
Keep plugs, terminals, cables and receptacles in
good condition to avoid shorts and sparks.
Keep filler plugs firmly in place a t all times
except when the electrolyte level is checked,
when water is added to the cells or when the
specific gravity is checked.
Make sure the vent holes in the filler plugs are
open to allow the gas to escape from the cells.
Do not allow cleaning solution, dirt or any
foreign matter to enter the cells.
Make sure you install the correct size battery. A
smaller or lighter weight battery could seriously
affect truck stability. See the truck's
specification plate for more information.
Section 2. Safety
Battery Safety