Emc; Communications; A.4.2 Emc - Siemens SIDOOR ATD401W System Manual

Appendices
A.4 Standards, directives and laws
A.4.2

EMC

Immunity
DIN EN 61000-6-2:2005 + AC:2005 Part 6-2
Generic standards – Immunity for industrial environments (IEC 61000-6-2:2005); German
version EN 61000-6-2
Emission standard for residential environments
DIN EN 61000-6-2:2005 + AC:2005 Part 6-3
Generic standards – Emission standard for residential, commercial and light-industrial
environments (IEC 61000-6-3:2006 + A1:2010); German version EN 61000-6-3:2007 +
A1:2011/ DIN EN 61000-6-3 (2007-09) also applies until 2014-01-01
Note
The stipulations of DIN EN 61000-6-3 are fulfilled when using the SIDOOR Transformer as
the power supply component. DIN EN 61000-6-3 is not fulfilled if the SIDOOR NT40 is used
as the power supply component.
Emission standard for industrial environments
DIN EN 61000-6-2:2005 + AC:2005 Part 6-4
Generic standards – Emission standard for industrial environments (IEC 61000-6-4:2006 +
A1:2010); German version EN 61000-6-4:2007 + A1:2011/ DIN EN 61000-6-4 (2007-09)
also applies until 2014-01-01
A.4.3

Communications

The EIA 485 standard applies to physical data transfer (RS 485 interface).
USS protocol specification, Edition 09.94 by Walter Möller-Nehring, Siemens AG,
ASI 1 D SP, Erlangen and Wolfgang Bohrer, Siemens AG, ASI 1 D SP, Erlangen
PROFIBUS was defined in DIN 19245 in 1991/1993, changed to EN 50170 in 1996 and has
been defined in IEC 61158/IEC 61784 since 1999.
PROFINET DIN EN 61158 and IEC 61784-2
312
ATD4xxW Door Controller for Industrial Applications
System Manual, 01/2017, A5E38080677-AB