Siemens SIDOOR ATD401W System Manual page 185

Parameter Name
ID
p20005 DCMD_DI1_Q7
p20006 DCMD_DI2_Q8
p20007 DCMD_DI2_Q9
p20008 DCMD_DI2_Q10
p20009 DCMD_DI3_Q11
p20010 DCMD_DI3_Q12
p20011 DCMD_DI3_Q13
p20012 DCMD_DI4_Q14
p20013 DCMD_DI4_Q15
p20014 DCMD_DI4_Q16
p20031 DCMD_DI0_39
p20032 DCMD_DI1_40
p20033 DCMD_DI2_41
p20034 DCMD_DI3_42
p20035 DCMD_DI4_43
Control bits (as of V1.10)
p20036 DCMD_SBIT0_Q44
p20037 DCMD_SBIT0_Q45
p20038 DCMD_SBIT0_Q46
p20040 DCMD_SBIT0_Q48
p20041 DCMD_SBIT0_Q49
p20042 DCMD_SBIT0_Q50
p20044 DCMD_SBIT0_Q52
p20045 DCMD_SBIT0_Q53
p20046 DCMD_SBIT0_Q54
p20048 DCMD_SBIT0_Q56
p20049 DCMD_SBIT0_Q57
p20050 DCMD_SBIT0_Q58
p20052 DCMD_SBIT0_Q60
ATD4xxW Door Controller for Industrial Applications
System Manual, 01/2017, A5E38080677-AB
Description
Level-controlled output; output follows the input directly
Rising (positive) edge
Falling (negative) edge
Level-controlled output; output follows the input directly
Rising (positive) edge
Falling (negative) edge
Level-controlled output; output follows the input directly
Rising (positive) edge
Falling (negative) edge
Level-controlled output; output follows the input directly
Level-controlled output; output follows the input inverted
(firmware version 1.03 or higher)
Rising (positive) edge
Falling (negative) edge
Level-controlled output, output follows the input directly
Rising (positive) edge
Falling (negative) edge
Level-controlled output, output follows the input directly
Rising (positive) edge
Falling (negative) edge
Level-controlled output, output follows the input directly
Rising (positive) edge
Falling (negative) edge
Level-controlled output, output follows the input directly
Rising (positive) edge
4.9 Operation and configuration of the control unit
Output becomes active for one cycle when input edge
detected.
The entered drive order (DCMD) is latched (stored)
automatically.
Output becomes active for one cycle when input edge
detected.
The entered drive order (DCMD) is latched (stored)
automatically.
Output becomes active for one cycle when input edge
detected.
The entered drive order (DCMD) is latched (stored)
automatically.
Output is active for one cycle when input edge is de-
tected.
The entered driver order (DCMD) is automatically
latched (stored).
Output is active for one cycle when input edge is de-
tected.
The entered driver order (DCMD) is automatically
latched (stored).
Output is active for one cycle when input edge is de-
tected.
The entered driver order (DCMD) is automatically
latched (stored).
Output is active for one cycle when input edge is de-
tected.
The entered driver order (DCMD) is automatically
latched (stored).
Output is active for one cycle when input edge is de-
Controllers
185