Disassembling The Power Supply Box - Technogym Jog Now Excite+ 700 Service Maintenance Manual

7.17. DISASSEMBLING THE POWER SUPPLY BOX

Figure 7.17-1
Page 7.34
JOG NOW Excite +: Service & maintenance manual - rev. 5.1
Carry out the procedure described in paragraph:
7.13. "Disassembling the motor guard".
1. Unplug the power supply cable from the
driver box.
2. Unplug the ground cable from the frame.
3. Back off the 3 screws (a) using a 4mm
hexagonal wrench.
4. Remove the power supply box.
To reassemble the power supply box, carry out
the above steps in reverse order.