Disassembling The Emergency Button - Technogym Jog Now Excite+ 700 Service Maintenance Manual

JOG NOW Excite +: Service & maintenance manual - rev. 5.1

7.5. DISASSEMBLING THE EMERGENCY BUTTON

Figure 7.5-1
Figure 7.5-2
Figure 7.5-3
Carry out the procedure described in paragraph:
7.1. "Disassembling the Display".
1. Back off the 8 screws (a) using a medium
Phillips screwdriver.
2. Remove the front display casing and place it
on a work bench.
3. Disconnect the cable (b) from the two fast-on
connectors on the emergency button.
4. Back off the 4 screws (c) using a small
Phillips screwdriver.
5. Remove the emergency button.
6. Back off the 2 screws (d) using a medium
Phillips screwdriver and remove the two
microswitches.
It is possible to disassemble the emergency
button avoiding to disassemble the complete
dashboard:
7. Back off the 2 screws (e) using a medium
Phillips screwdriver.
8. Remove the rear covering casing (f) to enter
to the emergency device.
To reassembly the Emergency Button, carry out
the above steps in the reverse order.
Page 7.19