JOG NOW Excite +: Service & maintenance manual - rev. 5.1
7.2.3.
LCD (E) + T
Figure 7.2-14
Figure 7.2-15
Figure 7.2-16
S
OUCH
CREEN
Carry out the procedure described in paragraph:
7.2.2.5 "CPU Board (D)".
1. Remove the Inverter if not previously
removed, as above indicated.
2. Back off the 6 screws (b) using a medium
Phillips screwdriver.
3. Remove the plate containing of LCD.
4. Carefully overturn the LCD.
5. Back off the 2 screws (c) on both sides, using
a medium Phillips screwdriver.
6. Remove the LCD (E) from its support plate.
7. With carefully remove the Touch Screen (d)
and replace if it is necessary.
Page 7.11