The Machine Is Not Flat - Technogym Jog Now Excite+ 700 Service Maintenance Manual

JOG NOW Excite +: Service & maintenance manual - rev. 5.1

8.4. THE MACHINE IS NOT FLAT

This problem may be due to the positioning of the machines on a not flat surface.
To level the machine, you may adjust the height of the levelling foot as illustrated below:
Figure 8-3
For the levelling adjustment, carry out the operation on the rear RIGHT foot, as shown in figure:
1. Screw or unscrew the foot (a) to bring the frame in a flat and stable position.
2. At adjustment made, lock down the nut (b).
Page 8.5