Disassembling The Limit Switch - Technogym Jog Now Excite+ 700 Service Maintenance Manual

JOG NOW Excite +: Service & maintenance manual - rev. 5.1

7.15. DISASSEMBLING THE LIMIT SWITCH

Figure 7.15-1
Take care to assemble the limit switch in the correct way as in the figure above: the fast
on (1) has to face toward the REAR SIDE of the machine and the two fast-on (2) and (3)
toward the FRONT SIDE.
Carry out the procedure described in paragraph:
7.13. "Disassembling the motor guard".
1. Disconnect the connector of the limit switch
cable from the Driver.
2. Press on both the sides of the limit switch
and pull it out from the lower side of the
machine.
To reassemble the limit switch, carry out the
above steps in reverse order.
Figure 7.15-2
Page 7.31