JOG NOW Excite +: Service & maintenance manual - rev. 5.1
7.16.2. D
ISASSEMBLING THE
Figure 7.16-3
AT-UL D
RIVER
Carry out the procedure described in paragraph:
7.13. "Disassembling the motor guard".
1. Back off the 4 screws (a) using a medium
Phillips screwdriver.
2. Disconnect the cables entering the Driver
box:
• Power Supply cable,
• Cable connecting High Kit – Lower Kit,
• Limit switch cable,
• Ground connection cable,
• Tread belt motor cable,
• Elevation motor cable.
3. Remove the Driver Box.
To reassemble the Lower Kit, carry out the
above steps in reverse order.
Page 7.33