Figure 7.21-2
Figure 7.21-3
Figure 7.21-4
Page 7.40
JOG NOW Excite +: Service & maintenance manual - rev. 5.1
4. Remove the ferrite (b) from the motor cable.
Carry out the procedure described in paragraph:
7.16.1. "Disassembling the ALE Driver".
5. Cut the cable-tie (c).
6. Slip
off
the
autotransformer under the elevation micro
with caution.
During the reassembly: replace the cable
under the elevation micro, as shown in
the figure at the side.
(d)
cable
from
Continued on following page...
the