7.13. DISASSEMBLING THE MOTOR GUARD
Figure 7.13-1
Page 7.28
JOG NOW Excite +: Service & maintenance manual - rev. 5.1
Lift up the machine at the elevation of 10%, to
make the procedure easier and turn off the
machine and unplug the mains lead from the
wall outlet.
1. Loosen the 6 screws (a) using a 4mm
hexagonal wrench.
2. Remove the motor guard pulling it out from
the front side of the machine.
To reassemble the motor guard, carry out the
above steps in reverse order.
During the reassembly: leave the screws
allow for the reassembly of the motor
guard.