Disassembling The Cardio Receiver; Hs/Hr Receiver (Chest Belt/Hand Sensor) - Technogym Jog Now Excite+ 700 Service Maintenance Manual

7.6. DISASSEMBLING THE CARDIO RECEIVER

7.6.1. HS/HR R
ECEIVER
Figure 7.6-1
Figure 7.6-2
Figure 7.6-3
Page 7.20
JOG NOW Excite +: Service & maintenance manual - rev. 5.1
(C B /H
HEST ELT AND
Carry out the procedure described in paragraph:
7.5. "Disassembling the emergency button" up
to step (2).
1. Cut the cable tie (a); remove the adhesive
2. Remove the sponge (d) and unplug the
3. Unplug the connector (f) and the fast-on (g),
S )
ENSOR
tape (b) and the nylon bag (c).
connector (e).
During the reassembly: place the coil,
highlight in figure, oriented upwards
and toward the user.
During the reassembly: fold the sponge
on the Board: gently and without
pressing.
on the opposite side of the cardio receiver.