JOG NOW Excite +: Service & maintenance manual - rev. 5.1
7.2. DISASSEMBLING THE DISPLAY BOARD AND
COMPONENTS
7.2.1.
LED D
IASPLAY
Figure 7.2-1
(ARM B
)
OARD
Carry out the procedure described in paragraph:
7.1.1. "LED Display".
Place the Display on a work bench:
1. Unplug the connector highlight in the figure.
2. Back off the 5 screws (a) using a small
3. Remove the Board.
Phillips screwdriver.
To reassemble the ARM Board, carry out the
above steps in reverse order.
After the reassembling of the board,
remember to fix the keyboard connector
using a drop of hot glue.
Page 7.3