JOG NOW Excite +: Service & maintenance manual - rev. 5.1
7.6.2. HR R
ECEIVER
Figure 7.6-4
Figure 7.6-5
(C
B
)
HEST
ELT
Carry out the procedure described in paragraph:
7.6.1. "HS/HR Receiver (Chest Belt/Hand
Sensor)" up to step (2).
1. Unplug the connector cable (a) from the
receiver.
CAUTION: During reassembly, position
the receiver so that the coil is facing up
toward the guard (f) as shown in Figure
7.6-2.
To reassemble the HR Receiver, carry out the
above steps in reverse order.
Page 7.21