Disassembling The Power Supply Box (C) - Technogym RUN PERSONAL Service Maintenance Manual

RUN PERSONAL: Service & maintenance manual - rev. 3.1
7.11.3. D
ISASSEMBLING THE POWER SUPPLY BOX
Figure 7.11-13
(C)
Carry out the procedure described in paragraph:
7.11.1. "Disassembling the ALE Drive".
1. Back off the 2 screws (a) using a large
Phillips screwdriver.
2. Remove the power supply box (C)
To reassemble the power supply box, carry out
the above steps in reverse order.
Page 7.31