JOG NOW Excite +: Service & maintenance manual - rev. 5.1
10. AGGIORNAMENTO DEL SW
The procedure is activated by pressing the top right-hand corner, the bottom left-hand corner and the bottom
right-hand corner of the screen in that sequence when the equipment is in Stand-By, as shown in the figure
below.
A new display will appear from which you can gain access to the various configuration menus, by
entering the password on the number keyboard:
2502
In order to access the menu, enter the password
and press the ENTER key in order to
confirm, ESCI in order to quit.
For the following menu, please refer to the relevant chapter in the VISIO manual.
Pagina 10.1