Installation; First Power-On; To Check The Correct Operation Of The Machine - Technogym Jog Now Excite+ 700 Service Maintenance Manual

JOG NOW Excite +: Service & maintenance manual - rev. 5.1

5.3. INSTALLATION

To correctly install the machine, proceed as follows:
1. Ensure that the specifications and requirements for installation have been met, see paragraph:
5.1. "Specifications and requirements".
2. Position the machine as specified above, on a level surface that is free of vibrations and has
sufficient carrying capacity for the combined weight of the machine and user.
3. The machine is shipped partially assembled and packed in a carton fixed to a wooden pallet.
Follow the assembly procedure described in the "Operating and Service Instructions" supplied
with each machine.
4. Connect the mains lead to the power inlet socket on the machine.
5. Place the on/off switch in the "0" position.
6. Plug the mains lead into the wall outlet.

5.4. FIRST POWER-ON

After completing the installation procedure, the machine is ready to be powered up. To turn on the
machine, simply toggle the on/off switch from the "0" position to the "1" position.
During power-up the machine resets the incline. After completing the power-on reset, the machine
goes into standby, awaiting a keyboard command.
5.5. TO CHECK THE CORRECT OPERATION OF THE
MACHINE
1. Get on the machine;
2. Press the "Quick Start" key to begin exercising and check that the tread belt motor starts;
3. Press the "+" and "-" keys on the keyboard and check that the tread belt speed varies
accordingly;
4. Press the "↑" and "↓" keys and check that the incline varies accordingly;
5. Press the emergency button and check that the tread belt stops;
6. Put on the heart rate meter and check that the machine correctly reads the heart rate value;
7. Grasp the sensors and check that the machine correctly reads the heart rate value.
Page 5.3