Disassembling The Keyboard / Touch Screen; Led Keyboard - Technogym Jog Now Excite+ 700 Service Maintenance Manual

7.4. DISASSEMBLING THE KEYBOARD / TOUCH SCREEN

7.4.1. LED K
EYBOARD
Figure 7.4-1
500 LED
Figure 7.4-2
2. Use a sharp tool to lift up and detach a corner of the keyboard.
To assemble a new keyboard:
1. Remove the backing film which protects the adhesive.
2. Insert the connector in the special slot on the display and connect it to the Display Board.
3. Apply the adhesive part, starting from the left and working toward the right, without bending the
keyboard.
4. Remove the protective film.
Page 7.16
JOG NOW Excite +: Service & maintenance manual - rev. 5.1
Carry out the procedure described in paragraph:
7.1. "Disassembling the ".
1. Bring the display assembly on a work bench
and disconnect the connector of the keyboard
After the reassembling of the board,
remember to fix the keyboard connector
using a drop of hot glue.
Continued on following page
700 LED
Figure 7.4-3
→