Technogym Jog Now Excite+ 700 Service Maintenance Manual page 144

Figure 7.20-3
Page 7.38
JOG NOW Excite +: Service & maintenance manual - rev. 5.1
Carry out the procedure described in paragraph:
7.14. "Disassembling the lower guard".
Remember to put the cable tie (a) again
while reassembling. If you don't have a
new one do not cut it but remove using a
small flat screwdriver to open the
engaging tooth.
3. Remove the fixing cable tie (a).
4. Remove the Power Supply (b).
To reassemble the Power Supply, carry out the
above steps in reverse order.