Disassembling The Elevation Motor - Technogym Jog Now Excite+ 700 Service Maintenance Manual

7.19. DISASSEMBLING THE ELEVATION MOTOR

Figure 7.19-1
Figure 7.19-2
Figure 7.19-3
Page 7.36
JOG NOW Excite +: Service & maintenance manual - rev. 5.1
Carry out the procedure described in paragraph:
7.14. "Disassembling the lower guard".
Turn the machine over on one side:
1. Unplug the cable from the Driver.
2. Remove the split pin (a) and remove the pin
(b) that fixing the elevation motor to the
frame.
3. Remove the split pin (c) and unthread the pin
(d).
4. Remove the elevation motor (e).
To reassemble the elevation motor, carry out the
above steps in reverse order.
CAUTION: In case of elevation carriage
disassembly, during the reassembly lock
down the screws (f) using a torque
wrench settings for 50Nm.
It is possible to disassemble the elevation
motor from the upper side avoiding
turning the machine over one side. To
do that removes first the driver box.