Audio / Video External Connectors Board - Technogym Jog Now Excite+ 700 Service Maintenance Manual

JOG NOW Excite +: Service & maintenance manual - rev. 5.1

7.3. AUDIO / VIDEO EXTERNAL CONNECTORS BOARD

Figure 7.3-1
Figure 7.3-2
1. Back off the 2 screws (a) using a small
Phillips screwdriver.
2. Remove the connectors board plug (b).
3. Disconnect the connectors highlighted in the
figure and back off the 2 screws to remove
the Audio/Video connector's board, using a
small flat screwdriver.
4. Remove the Audio/Video connector's board
(c).
To reassemble the Connectors Board,
carry out the above steps in reverse order.
Page 7.15