Disassembling The Motor Drive Belt And Motor Roller - Technogym Jog Now Excite+ 700 Service Maintenance Manual

JOG NOW Excite +: Service & maintenance manual - rev. 5.1
7.22.2. D
ISASSEMBLING THE MOTOR DRIVE BELT AND MOTOR ROLLER
Figure 7.22-3
Figure 7.22-4
Carry out the procedure described in paragraph:
7.13. "Disassembling the motor guard".
1. Release the spring (g) of the belt tensioning
mechanism.
2. Disengage the motor drive belt from the
pulley (h) on the front roller.
3. Remove the driving roller, extracting it from
the top on the right side and pulling it out
axially from the left.
4. Remove the motor drive belt from the motor
pulley (h).
To reassemble the components removed, carry
out the above steps in reverse order.
Page 7.45