Ethernet Ports Status Indicators - Oracle Exadata X5-2 Service Manual

Troubleshoot Hardware Faults Using the Oracle ILOM Web Interface
Status
Indicator
Name
Service
Required
Network Management Port Status Indicators
The server has one 10/100/1000BASE-T Ethernet management domain interface, labeled NET
MGT. There are two status indicators (LEDs) on this port. These indicators are visible from the
rear of the server.
TABLE 5
Status
Indicator
Name
Activity
Link speed

Ethernet Ports Status Indicators

The server has four Gigabit Ethernet ports (NET 3, NET 2, NET 1, and NET 0). There are two
status indicators on each port. These indicators (LEDs) are visible from the rear of the server.
TABLE 6
Status
Indicator Name
Activity
Link speed
30 Oracle Exadata Storage Server X5-2 High Capacity Service Manual • January 2018
Icon Color
Amber
Network Management Port Status Indicators
Location Color
Top right Green
Top left Green
Gigabit Ethernet Port Status Indicators
Location Color
Top left Green
Top right Bicolored: Amber/
Green
State and Meaning
■ STEADY ON – Normal operation. Input AC power and DC
output voltage are within specification.
■ OFF – Normal operation. No service action is required.
■ STEADY ON – The power supply (PS) has detected a PS fan
failure, PS overtemperature, PS over current, or PS over or under
voltage.
State and Meaning
■ ON – Link up.
■ OFF – No link or down link.
■ FLASHING – Packet activity.
■ Green ON – 1000BASE-T link.
■ OFF – 10/100BASE-T link.
State and Meaning
■ ON – No function.
■ OFF – No activity.
■ FLASHING – Packet activity.
■ OFF – 100BASE-T link.
■ Amber ON – 1000BASE-T link.
■ Green ON – 10GBBASE-T link.
■ FLASHING – No function.