Oracle Exadata X5-2 Service Manual page 119

b. Extend the server to the maintenance position.
See "Extend the Server to the Maintenance Position" on page
Attach an antistatic wrist strap to your wrist, and the to a metal area on the
c.
chassis.
See "Electrostatic Discharge Safety" on page
d. Remove the server top cover.
See "Remove the Server Top Cover" on page
Remove fan modules.
e.
See "Remove a Fan Module" on page
f. Swivel the air baffle into the upright position to allow access to the SAS
storage drive cables.
Remove the server's front fan assembly door cover.
g.
See "Remove the Fan Assembly Door From the Server" on page
2. Disconnect the SAS cables.
a. To disconnect the SAS cables between the Oracle Storage 12 Gb/s SAS
PCIe RAID HBA card in PCIe slot 6 and the front storage drive backplane,
press each latch, and then pull out to disengage the cable from each SAS
connector [1 and 2].
See also "Remove the Sun Storage 12 Gb/s SAS PCIe RAID HBA Card" on page
Remove SAS Storage Drive Cables
55.
48.
58.
67.
Servicing Components That Require Server Power-Off
59.
124.
119