Remove The Server From The Rack - Oracle Exadata X5-2 Service Manual

Remove the Server From the Rack

Caution -
4. While the release latch covers are in the open position, slowly pull the server
forward until the slide-rails latch into a locked position [2].
The server is now in the extended maintenance position.
Related Information
"Disconnect Cables From the Server" on page 54
■
"Remove the Server From the Rack" on page 56
■
"Reinstall the Server in the Rack" on page 164
■
Remove the Server From the Rack
Caution -
unmount and carry the chassis.
1. Disconnect all the cables and power cords from the server.
56 Oracle Exadata Storage Server X5-2 High Capacity Service Manual • January 2018
Deploy any rack anti-tilt mechanism before releasing the slide-rail release latches.
The server weighs approximately 63 pounds (28.5 kg). Two people are required to