Oracle Exadata X5-2 Service Manual page 98

Install the Battery
Note -
the Network Time Protocol (NTP), the Oracle ILOM SP clock will be reset as soon as the
server is powered on and connected to the network; otherwise, proceed to the next step.
If the service processor is not configured to use NTP, you must do one of the
3.
following:
Reset the Oracle ILOM SP clock using the Oracle ILOM CLI or the web interface.
■
For instructions, refer to the Oracle Integrated Lights Out Manager (ILOM) 3.2
Documentation Library at: http://www.oracle.com/goto/ilom/docs.
Use the BIOS Setup Utility to reprogram the host clock.
■
For the BIOS Main menu that supports this procedure, refer to the Oracle X5 Series Servers
Administration Guide at http://www.oracle.com/goto/x86admindiag/docs.
4. Return the server to operation.
Lower the air baffle to the installed position.
a.
Install the server top cover.
b.
See
Return the server to the normal rack position.
c.
See
d. Reconnect the power cords to the server power supplies, and power on the
server.
See
Server" on page
Related Information
"Remove the Battery" on page 96
■
98 Oracle Exadata Storage Server X5-2 High Capacity Service Manual • January 2018
If the service processor is configured to synchronize with a network time server using
"Install the Server Top Cover" on page
"Return the Server to the Normal Rack Position" on page
"Reconnect Power and Data Cables" on page 167
167. Verify that the AC OK LED is lit.
161.
165.
and "Power On the