Oracle Exadata X5-2 Service Manual page 219

Setup Options Options
Enable DHCP Disabled/Enabled
Initiator IP Address NA
Initiator Subnet Mask NA
Gateway NA
Target Name NA
Target IP address 0.0.0.0
Target Port
Boot LUN
Authentication Type CHAP/None
CHAP Type One Way/Mutual
CHAP Name NA
CHAP Secret NA
Delete Attempts NA
Change Attempt Order NA
BIOS Advanced Menu Selections
Defaults Description
Example: Update
0ABBCCDDEEFF to
0ABBCCF07901 by
inputting F07901
Disabled Enable or disable DHCP
0.0.0.0 Use to set initiator IP
address in dotted-decimal
notation.
0.0.0.0 Use to set initiator subnet
mask IP address in dotted-
decimal notation.
0.0.0.0 Use to set initiator gateway
IP address in dotted-
decimal notation.
NA The worldwide unique
name of the target. Only
IQN format is accepted.
None Use to set target IP address
in dotted-decimal notation.
3260 Use to change target port
number.
0 Use to set the hexadecimal
representation of the
boot logical unit number
(LUN).
Example: 4752-3A4F-
6b7e-2F99
CHAP Define the Challenge-
Handshake Authentication
Protocol (CHAP).
Available settings are
CHAP, Kerberos, and
None.
One Way Use to set CHAP type to
either One Way or Mutual.
None Use to set CHAP name.
None Use to set the CHAP secret
password. The secret
length range is 12 to 16
bytes.
NA Use to delete one or more
attempts.
NA Use to change the order of
attempts. Use arrow keys
to select the attempt, then
BIOS Setup Utility Menu Options 219