Hitachi X200-002SFE/NFU Instruction Manuals page 81

Func.
Code
D007
D013
D016
D017
D018
Trip Event and History Monitoring
The trip event and history monitoring features lets you cycle through related
information using the keypad. See
page 6-5 for more details.
Func.
Code
D080
D081
D082
D083
D102
D104
More user manuals on
Name /
SRW Display
Scaled output frequency
monitor
F-Cnv 00000.00
Output voltage monitor
Vout 00000V
Cumulative operation
RUN time monitor
RUN 0000000hr
Cumulative power-on time
monitor
RUN 0000000hr
Cooling Fin temperature
monitor
TH-Fin 0000.0 C
Name /
SRW Display
Trip counter
ERR CNT 00000
Trip monitor 1
ERR1 ########
Trip monitor 2
ERR2 ########
Trip monitor 3
ERR3 ########
DC bus voltage monitor
Vpn 0000.0Vdc
Electronic thermal monitor
E-THM 0000.0%
ManualsBase.com
"D" Function
Description
Displays the output
scaled by the constant in B086.
Decimal point indicates range:
XX.XX 0.00 to 99.99
XXX.X 100.0 to 999.9
XXXX. 1000. to 9999.
XXXX 1000 to 9999
(x10=10000 to 99999)
Voltage of output to motor,
Range is 0.0 to 600.0V
Displays total time the inverter has
been in RUN mode in hours.
Range is 0 to 9999 / 1000 to 9999 /
⎡100 to ⎡999 (10,000 to 99,900)
Displays total time the inverter has
been powered up in hours.
Range is 0 to 9999 / 1000 to 9999 /
⎡100 to ⎡999 (10,000 to 99,900)
Temperature of the cooling fin.
(0.0~200)
"Monitoring Trip Events, History, &
"D" Function
Description
Number of trip events,
Range is 0. to 9999
Displays trip event information:
• Error code
• Output freq. at trip point
• Motor current at trip point
• DC bus voltage at trip point
• Cumulative inverter operation
time at trip point
• Cumulative power-ON time at
trip point
Voltage of DC bus inside inverter,,
Range is 0.0 to 999.9
Accumulated value of electronic
thermal detection, range is from 0.0
to 100.0
Run
Mode Units
Edit
frequency − Hz times
constant
− V
− hours
− hours
− °C
Conditions" on
Run
Mode Units
Edit
− events
−
− −
− −
− V
− %
3−7