4−54
The following table shows the available analog input settings. Parameter A005 and the
input terminal [AT] determine the External Frequency Command input terminals that
are available, and how they function. The analog inputs [O] and [OI] use terminal [L] as
the reference (signal return).
NOTE: You cannot give [O] and [OI] input simultaneously on X200 series inverter.
Other Analog Input-related topics:
•
•
•
•
•
•
More user manuals on
A005
[AT] Input
Analog Input Configuration
ON
02
OFF
ON
03
OFF
04
(ignored)
05
(ignored)
"Analog Input Settings" on page 3–13
"Additional Analog Input Settings" on page 3–28
"Analog Signal Calibration Settings" on page 3–61
"Analog Input Current/Voltage Select" on page 4–22
"ADD Frequency Enable" on page 4–30
"Analog Input Disconnect Detect" on page 4–44
ManualsBase.com
Keypad Pot
[O]
Keypad Pot
[OI]
[O]
[OI]