Hitachi X200-002SFE/NFU Instruction Manuals page 105

Potentiometer Settings
Input Range Settings – The parameters in the following table adjust the input
characteristics of the integrated POT. When using the POT to command the inverter
output frequency, these parameters adjust the starting and ending ranges for the POT,
as well as the output frequency range.
Func.
Code
A151
A152
A153
A154
A155
More user manuals on
"A" Function
Name /
SRW Display
POT active range start
frequency
POT-EXS 0000.0Hz
POT input active range end
frequency
POT-EXE 0000.0Hz
POT input active range start
POT-EX%S 00000%
POT input active range end
POT-EX%E 00000%
POT input start frequency
enable
POT-LVL 0Hz
Max frequency
A152
A015=00
A015=01
A151
0
0% 100%
A153 A154
Counterclockwise Clockwise
Input scale
ManualsBase.com
Description
The output frequency
corresponding to the POT range
starting point,
range is 0.0 to 400.0 Hz
The output frequency
corresponding to the POT range
ending point,
range is 0.0 to 400.0 Hz
The starting point (offset) for the
POT range,
range is 0. to 100.%
The ending point (offset) for the
POT range,
range is 0. to 100.%
Two options; select codes:
00...Use offset (A151 value)
01...Use 0Hz
%
3−31
Defaults
Run
Mode
-FE -FU
Units
Edit (EU) (USA)
0.0 0.0 Hz
0.0 0.0 Hz
0. 0. %
100. 100. %
01 01 −