Hitachi X200-002SFE/NFU Instruction Manuals page 133

Func.
Code
C041
C241
C042
C043
C044
C052
C053
More user manuals on
"C" Function
Name /
SRW Display
Overload level setting
OV LVL 001.60A
Overload level setting,
2nd motor
2OV LVL 001.60A
Frequency arrival setting
for acceleration
ARV ACC 0000.0Hz
Frequency arrival setting
for deceleration
ARV DEC 0000.0Hz
PID deviation level setting
ARV PID 003.0%
PID FBV function high
limit
PID LtU 0100.0%
PID FBV function variable
low limit
PID LtL 0000.0%
ManualsBase.com
Description
Sets the overload signal level
between 0% and 200% (from 0 to
two time the rated current of the
inverter)
Sets the overload signal level
between 0% and 200% (from 0 to
two time the rated current of the
inverter)
Sets the frequency arrival setting
threshold for the output frequency
during acceleration,
range is 0.0 to 400.0 Hz
Sets the frequency arrival setting
threshold for the output frequency
during deceleration,
range is 0.0 to 400.0 Hz
Sets the allowable PID loop error
magnitude (absolute value), SP-PV,
range is 0.0 to 100%
When the PV exceeds this value,
the PID loop turns OFF the PID
second stage output, range is 0.0 to
100%
When the PV goes below this
value, the PID loop turns ON the
PID second stage output, range is
0.0 to 100%
3−59
Defaults
Run
Mode
-FE -FU
Units
Edit
(EU) (USA)
Rated current A
for each
inverter model
Rated current A
for each
inverter model
0.0 0.0 Hz
0.0 0.0 Hz
3.0 3.0 %
100.0 100.0 %
0.0 0.0 %