Measurement Option Settings - Konica Minolta CM-M6 Instruction Manual

Measurement Option Settings

„ „
To set measurement options, select "Measurement setup" from the <Measurement cond.> menu screen. Select or
specify the following items as the measurement options:
• Measurement angle (-15°, 15°, 25°, 45°, 75°, 110°) : Specify the measurements angle.
• Auto average (1 to 10)
• Manual average (1 to 10)
• Manual average option (Manual save/Auto save) : Select the save method when performing manual averaging.
• Tilt detection (OFF/ON)
Operating Procedure
1
Press [MENU], and then use [] or [] to display the
<Measurement cond.> menu screen.
To return to the previous screen, press [MENU] or [ESC].
Memo
2
Use [] or [] to move the cursor to "Measurement
setup", and then press the [Confirmation] key.
The <Measurement setup> screen is displayed.
3
After setting the measurement conditions, press the
[ESC] button to return to the previous screen.
67
Start the procedure from the measurement screen.
: Specify the number of measurements for auto averaging.
: Specify the number of measurements for manual averaging.
Sample
Measurement cond.
Measurement setup
Observer/Illuminant
Display cond.
Sample
Measurement cond.
Measurement setup
Measurement angle
Auto average
1 Times
Manual average
1 Times
Manual average option
Manual save