Measurement Condition Settings; X84; „ Measurement Condition Settings - Konica Minolta CM-M6 Instruction Manual

Measurement Condition Settings

This instrument requires measurement condition settings (average count, observer/illuminant, and display) to be
configured before measurement can be started.

Measurement Condition Settings

„ „
To set measurement conditions, select the setting from the <Measurement cond.> menu. The following three
items can be specified as the measurement conditions:
• Measurement setup : S ets the measurement angle, number of auto average or manual average measurements
to perform, and whether the tilt detection function should be turned OFF or ON.
• Observer/Illuminant : C onfigure the two observers/illuminants.
• Display cond. : S ets the display type, color space, color difference equation, and direction.
Operating Procedure
1
Press [MENU], and then use [] or [] to display the
<Measurement cond.> menu screen.
To return to the previous screen, press [MENU] or [ESC].
Memo
Sample
Measurement cond.
Measurement setup
Observer/Illuminant
Display cond.
3
66