Measurement Condition Settings - Konica Minolta CM-23d Instruction Manual

Measurement Condition Settings

This instrument requires measurement condition settings (measurement mode, average count, observer/
illuminant, and display) to be configured before measurement can be started.
„ Measurement Condition Settings
To set measurement conditions, select the setting from the <Measurement cond.> menu. The following four items
can be specified as the measurement conditions:
• Measurement mode : Select the measurement mode.
• Measurement setup : Specify the number of measurements for automatic and manual averaging.
• Observer/Illuminant : Configure the two observers/illuminants.
• Display cond.
Operating Procedure
1
Press [MENU], and then use [◀] or [▶] to display the
<Measurement cond.> menu screen.
Memo
To return to the previous screen, press [MENU] or [ESC].
81
: Configure the display type, color space, color difference equation, and 13 custom display items.