Error Messages - Voltech ATi User Manual

G S
ETTING TARTED
After the measurement, remove the component and place it in the 'Pass' or
'Fail' bin, as appropriate.
Continue in this way until each component in the batch has been tested, then
press 'Finish'.

2.5.2 Error Messages

Server Program Store Error
Possible Causes:
Faulty cable
The cable from the AT Server port to the Server PC has a broken wire or is not
plugged in correctly.
COM port
The COM port has not been set up in the Server application.
Server not running
Either the Server PC is not powered on, or the Server application is not
running.
P 2-56
AGE
V AT U
OLTECH I SER
M
ANUAL