Voltech ATi User Manual page 85

G S
ETTING TARTED
If there is a failure at any point in the self-test, you will see a display similar to
the one below:
The message shown on the lower two display lines will depend on what
caused the failure.
In the unlikely event that your tester continues to fail, please make a careful
note of the failure message and error codes, which may be accessed by
pressing 'Details' at the above display, and contact your Voltech supplier
immediately. (For more detail on AT error codes, see chapter 3.)
V AT U M P 2-51
OLTECH I SER ANUAL AGE